Marine environments accelerate failure. We repair electronics suffering from:
- Water ingress and sealing failures leading to intermittent or dead units.
- Salt corrosion on PCBs, connectors, and RF stages causing poor range or noise.
- Power faults: reverse polarity, surges, brownouts, or charger-related stress.
- Sensor problems: broken transducer cables, failed hall or pressure sensors.
- Network issues: NMEA0183/NMEA2000, SeaTalk, CAN, or Ethernet port faults.
Every unit is cleaned, repaired, and validated under load to ensure reliability at sea.
We replicate onboard stress to ensure real-world reliability:
- Bench Verification: Supply ramp, load tests, signal I/O, RF and GPS lock checks.
- Environmental Conditioning: Salt-spray exposure, controlled humidity, and thermal cycling.
- Ingress Protection: Gasket replacement, conformal coating, potting where appropriate.
- Network Validation: NMEA0183/N2K talker/listener, CAN diagnostics, and loop checks.
- Final QA: Burn-in and functional run with documented results sent to you.
Upgrades available: improved sealing, stainless fasteners, and corrosion-resistant connectors.
We routinely service systems from major marine manufacturers including Garmin, Raymarine, Simrad, Lowrance, Furuno, B&G, Icom, Standard Horizon, and more. Older or discontinued models are welcome.
Integration support: NMEA0183/N2K gateways, CAN/Seatalk interfacing, and mixed-vendor networks. We focus on making your equipment interoperate reliably on board.
Note: We are independent repair specialists and are not affiliated with the manufacturers listed.
Turnaround: Typical diagnostics in 2–4 business days; most repairs in 5–10 days depending on parts.
- Mail-in preferred (Australia-wide). Detailed instructions provided after booking.
- Dockside visits by arrangement in limited areas; call to discuss availability.
- Packing: Remove brackets when possible; protect screens/ports; include fault description.
- Warranty & Aftercare: 3-month repair warranty, cleaning and corrosion prevention guidance included.
Questions about compatibility or urgency? We’ll advise the fastest, safest path.
Need help right now?
- Call: 0418 199 406
- Email: info@dimmerled.com.au
Response time: We aim to reply within 1 business day. After submitting the form, you’ll receive packing and shipping instructions.
Not sure if it’s repairable? Send a photo of the fault and we’ll advise options and rough costs.